21
www.magmaweld.com
USER MANUAL | KULLANIM KILAVUZU
ID 250T DC PULSE / ID 300T DC PULSE
EN
3.2 TIG Cycle
3.3 Menu Structure
The statuses of the functions on or off according to the modes are as follows.
3.3.1 TIG Welding Process
• 10 jobs programs including complete parameter settings can be stored and run for repeated jobs.
• In the first use, all parameters of all programs are in factory settings which are shown in the table.
• Push the program selection button. For selecting a previously adjusted program or changing its parameters.
• Push the welding mode selection button for selecting Touch-Lift TIG of HF start TIG.
• Push the 2 Stroke - 4 Stroke - Spot Welding Selection Button for selecting the appropriate mode for the work.
• Use TIG parameter selection button to change the welding parameters.When the led, which belongs to the
parameter you will change is turned on,adjust the parameter by turning the parameter adjustment button.
• Latest adjusted parameter values will be saved automatically. There is no need to do anything else for saving
the settings.
In HF Start TIG mode, a high ignition voltage is present at the torch. Never touch the tungsten
electrode or parts conducting welding current when the device is switched on.
Gas
Pre-Flow
Start
Current
Current
Up-slope
Current
Down-slope
Final
Current
Gas
Post-Flow
*Pulse
Frequency
***Base
Current
nia
M
tn
err
u
C
nia
M
tn
err
u
C
**Spot Welding Time
Start Current
Up-Slope Time
Main Current
Base Current
Pre-Gas Flow Time
Parameter
ID 300T DC PULSE
18
20
22
19
21
LED
0 - 5 sec.
1 sec.
40 A
30 A
85 A
Factory Setting
0-10 sec.
0.1-10 sec.
5 - 250 A
5 - 250 A
5 - 250 A
0-10 sec.
0.1-10 sec.
5 - 300 A
5 - 300 A
5 - 300 A
ID 250T DC PULSE
MMA Welding
Down-Slope Time
Final Current
Post-Gas Flow Time
Spot Welding Time
Water Cooler Time
26
28
25
27
30 A
2 sec.
3 min.
1 sec.
0.1 sec.
5 - 250 A
0-20 sec.
1 - 20
0.1 - 10 sec.
0-20 sec.
5 - 300 A
0-20 sec.
1 - 20
0.1 - 10 sec.
0-20 sec.
Pulse Cycle Rate
Frequency
24
23
75 Hz
% 50
0.1 - 2000 Hz
%1 - %99
0.1 - 2000 Hz
%1 - %99
Operation