20
www.magmaweld.com
USER MANUAL | KULLANIM KILAVUZU
ID 250T DC PULSE / ID 300T DC PULSE
EN
Operation
Trigger Mode and Electrode Type Selection Button
While in TIG welding modes; It is used to select one of the 2-Position, 4-Position, Tailstock Position
modes.
When 2-position is selected, led
10
lights up.
When 4-position is selected, led
11
lights up.
When the tailstock position is selected, led
12
lights up.
While in MMA mode; It is used to select one of the rutile, basic, cellulosic electrode modes.
When the rutile electrode is selected, led
10
lights up.
When the basic electrode is selected, led
11
lights up.
When cellulosic electrode is selected, led
12
lights up.
Button is for selecting flat DC TIG / PULSE DC TIG
Led 14 lights when flat DC TIG is selected and led 15 lights when PULSE DC TIG is selected.
When PULSE DC TIG is selected, its led 15 lights.
TIG Parameters Selection Buttons
It is used to select the TIG parameter to be adjusted. After the related TIG parameter’s led is on, the
parameter is adjusted to the desired value with the parameter setting button.
You can set the following TIG parameters:
18
Pre-Gas Flow Time Led
19
Starting Current Led
20
Up-Slope Time Led
21
Main Current Led
22
Base Current Led
23
Pulse Duty Cycle Led
24
Pulse Frequency Led
25
Down Slope Time Led
26
Final Current Led
27
Pos-Gas Flow Time Led
28
Spot Welding Time Led
9
13
16-17
