Magmaweld 513250P2M0, User Manual

Page: 16 / 132

EN
16
www.magmaweld.com USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
ID 500 TW DC PULSE
Electrode
Diameter
(mm)
Nozzle
Diameter
(mm)
Welding
Current
(ADC)
Gas Flow
(lt/sec)
1.0
1.6 6.3
9.5 30-70
30-150
6-8
6-8
• Secure the argon gas cylinder
(a)
with a chain.
• TIG Torch Connection; the trigger should be connected to the control socket with the terminals
1-2-3-4-5
as
shown.
(1)
Soldering direction has been taken as the reference.
(2)
Soldering direction has been taken as the reference.
• Use safe high quality regulators
(b)
and heaters approved by the standards to work safely and achieve the best
results.
• Keep the gas cylinder valve
(c)
open for a while, so that possible sediment and particles are discharged.
• Connect the gas regulator to the gas cylinder, making sure that the thread on the gas outlet of the gas cylinder
and the nut of the regulator overlap.
• Connect one end of the cylinder hose
(d)
to the gas regulator and the other end to the gas inlet at the rear of the
machine and turn on the gas cylinder valve.
• Adjust the flow rate with the flow regulating valve
(e)
.
• Make sure the connections are free of leakages.
2.5.2 Gas Connections
2.5.3 Trigger and Pedal System Socket Connections
Installation