MAGMATIC PRISMA DRIVER 8IP, User Manual

Page: 8 / 22

• DO NOT TOUCH the driver housing during operation. Turn OFF the power and allow
approximately 15 minutes for the driver to cool down before servicing.
• DO NOT shake driver, and avoid brute force when installing and/or operating.
• DO NOT operate driver if the power cord is frayed, crimped, damaged and/or if any of
the power cord connectors are damaged and do not insert into their sockets securely
and with ease.
NEVER force a power cord connector into a socket. If the power cord or
any of its connectors are damaged, replace it immediately with a new one of the same
power rating.
• DO NOT block any air ventilation slots.
• All fan and air inlets must remain clean and free of dust and debris.
• Always disconnect driver from main power source before performing any type of ser-
vice and/or cleaning procedure. Only handle the power cord by the plug end, and
NEVER pull out the plug by tugging the wire portion of the cord.
• Consistent operational breaks will ensure driver will function properly for many years.
• ONLY use the original packaging and materials to transport the driver for service.
SAFETY GUIDELINES
8