MAGMATIC Prisma Driver 8, User Manual

Page: 9 / 24

9
M A I N T E N A N C E G U I D E L I N E S
DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!
CLEANING
Frequent cleaning is recommended to ensure proper function and an extended life. The
frequency of cleaning depends on the environment in which the driver operates: damp,
smoky, or particularly dirty environments can cause greater accumulation of dirt on the
driver. Clean the external surface periodically with a soft cloth to avoid dirt/debris
accumulation.
NEVER use alcohol, solvents, or ammonia-based cleaners.
MAINTENANCE
Regular inspections are recommended to ensure proper function and extended life.
There are no user serviceable parts inside this driver, please refer all other service issues to
an authorized MAGMATIC service technician. Should you need any spare parts, please
order genuine parts from your local MAGMATIC dealer.
Please refer to the following points during routine inspections:
-
A detailed electrical check by an approved electrical engineer every three months, to make sure the
circuit contacts are in good condition in order to prevent overheating.
-
Be sure all screws and fasteners are securely tightened at all times. Loose screws may fall out during
normal operation, resulting in damage or injury as larger parts could fall.
-
Check for any deformations on the housing, rigging hardware, and rigging points (ceiling,
suspension, trussing). Deformations in the housing could allow for dust or liquids to enter into the
driver. Damaged rigging points or unsecured rigging could cause the driver to fall and seriously
injure a person(s).
-
Electric power supply cables must not show any damage, material fatigue, or sediments.
NEVER remove the ground prong from the power cable.