background image

• USE OUTDOORS ONLY.
• DO NOT USE THIS APPLIANCE INSIDE THE BOAT OR ANY ENCLOSED SPACE.
• GRILLS RADIATE HEAT. CLEARANCE FROM COMBUSTIBLES, 24” SIDES AND BACK. NEVER USE UNDER

AWNINGS, PATIO COVERS, ETC.

• USE PROPANE GAS ONLY. FUEL STORAGE SHOULD BE IN COMPLIANCE WITH THE AMERICAN BOAT

AND YACHT COUNCIL (ABYC) STANDARDS A-1 (9), MARINE LIQUIFIED PETROLEUM GAS (LPG) SYSTEMS.

• FOR NATURAL GAS APPLICATION CONTACT MAGMA.
• ALWAYS LIGHT GRILL WITH LID OPEN.
• NEVER LEAVE HOT GRILL UNATTENDED.
• DO NOT OVERHEAT GRILL, SEE OPERATING INSTRUCTIONS
• ALWAYS TURN GRILL OFF AFTER USE.
• USE GLOVE OR HOT PAD WHEN HANDLING HOT GRILL.
• NEVER LEAVE GAS CYLINDERS AND REGULATOR CONNECTED WHEN STOWED.
• STORE GAS CYLINDERS IN WELL VENTILATED AREA.
• DO NOT STORE GAS CYLINDERS INDOORS, IN DIRECT SUNLIGHT, BELOW DECKS ON BOATS,

OR IN LOCKERS NOT APPROVED FOR BUTANE OR PROPANE STORAGE.

• CAUTION: CHECK FOR GAS LEAKS EACH TIME CYLINDER IS CHANGED.
• NEVER CHECK FOR GAS LEAKS WITH A FLAME!
• DO NOT BLOCK, RESTRICT, OR OTHERWISE OBSTRUCT COMBUSTION OR VENTILATION

AIR OPENINGS.

• DO NOT MODIFY THIS APPLIANCE.
• CHECK THAT VALVE SEALING WASHER (A) IS IN PLACE AND IN GOOD

CONDITION BEFORE CONNECTING THE GAS CONTAINER.

• INSTALL CANISTERS IN WELL VENTILLATED AREA AND AWAY FROM OPEN

FLAME, HEAT SOURCE OR SPARKS. KEEP AWAY FROM OTHER PEOPLE OR
FLAMMABLE MATERIALS.

A

IMPORTANT SAFETY WARNINGS

READ ALL INSTRUCTIONS BEFORE OPERATING.

Each Magma

®

Gas Grill is individually fire tested before it leaves the factory. 

For this reason, the burner on your grill may be slightly discolored.

CONTENTS

2

CALIFORNIA PROPOSITION 65 – WARNING – The burning of gas cooking fuel generates some by-products, which are on the list of
substances, which are known by the State of California to cause cancer or reproductive harm.  California law requires businesses to
warn customers of potential exposure to such substances.  To minimize exposure to these substances, always operate this unit
according to the use and care manual, ensuring you provide good ventilation when cooking with gas.

Grill

Radiant Plate

Control Valve/

Regulator-Type 1

Tools

Needed

Two

9/16"

Wrenches

not included

“L” Bracket
 & Clamp 
 Assembly

Grill Grate

Knob

Turbo 

Venturi Tube

Assembly

Summary of Contents for P10-501












Reviews: