![Magma MG1860 User Manual Download Page 6](http://html1.mh-extra.com/html/magma/mg1860/mg1860_user-manual_3532943006.webp)
Thank You for choosing our product!
Examining content
Carefully check all components of set after opening the box. Contact product distributor if any of the items
are missing. Visual appearance of components may differ from the ones displayed in this manual.
Mixer body (x1)
Fixing (x1)
Flexible hoses (x2 for water mixers; x1 for water tap)
Pop-up waste set (only for mixers MG3261, MG3280, MG6261, MG6280).
Hand shower with shower hose and wall support (only for mixer MG6270).
Installation
IMPORTANT!
Recommended hot and cold water working pressure – up to 4.5 bars.
Recommended water temperature is from 4 to 80° C.
1.
Install water purification filters (for hot and cold water) up to 50 microns before mixer.
2.
Prior to connecting mixer to water pipes water should run for approximately 5 minutes from water
supply pipes in order to verify if any depositions are not left in pipes between filters and mixer.
3.
Carefully connect flexible hoses on angle valves after putting mixer on the sink – flexible hose for cold
water on the right and for hot – on the left.
4.
Ensure that flexible hoses would not be stretched, twisted or bent at a narrow angle after mixer
installation!
5.
Screw out aerator with its washer.
6.
Open mixer handle all the way in a middle position and let the water flow for approximately 5 minutes in
order to wash out depositions.
7.
Screw back in aerator with its washer.
8.
Check connection points if there is any leakage.
Usage
Mixers with one handle
Lift mixer handle upwards in order to run a water flow and lower it down in order to close it.
For regulating water temperature turn mixer handle to the right in order to make mixed water colder or to
the left in order to make mixed water hotter.
Cleaning
1.
Use water and soft fabric cloth for cleaning.
2.
Cleaning products containing acetic acid, abrasive materials or sharp objects may not be used for
cleaning mixer or its nearby surfaces in order to avoid damaging chromium coating.
3.
Chemical cleaning products may be used only if they are intended specifically for cleaning chrome
plated surfaces.
EN