USING GRILL WITH ON-BOARD LPG (PROPANE) SYSTEMS
• Magma On-Board LPG (Propane) Valves and Lpg (Propane) Low Pressure Gas Grill Connection Kits allow
Magma Grills to be installed within a boats existing on-board, pre-regulated low pressure LPG (Propane)
system.
• Use only Magma Type 3 Low Pressure LPG (Propane) Valves.
See our Valve Application Guide at www. MagmaProducts.com for correct valve.
• In North America use Magma A10-225 LPG 10' Gas Grill Connection Kit in conjunction with Type 3 Valve.
Outside North America check your local dealer for proper hose and fittings.
• A primary shutoff valve (supplied with Gas Grill Connection Kit) must be used with this control valve at point
of connection into your system. This allows shut off of gas supply to hose leading to grill.
• In Australia and New Zealand LPG fuel systems must be installed by a certified gas technician.
Propane (LPG)
Gas
Regulator
A10-225 LPG (Propane)
10' Gas Grill Conversion Kit
To other LPG
appliance
or use cap
Shut off
valve
Cylinder Valve
Gauge
Gas grill
Type 3
Valve
Solenoid
Typical Boat and R.V. Application
Gently insert valve stem into venturi tube upside down until fully inserted and rotate as shown.
IMPORTANT!! • DO NOT CONNECT A HIGH-PRESSURE SUPPLY HOSE
FROM A NON-REGULATED TANK DIRECTLY TO GRILL.
Magma's grills are designed for use with small disposable propane canisters or with pre-regulated low-pressure
propane and optional low-pressure valves. Running high-pressure propane fuel supply lines on a boat is in
violation of American Boat & Yacht Council (ABYC) guidelines and is not considered a safe application.
Additionally, impurities found in larger refillable propane tanks may clog the small orifices in the high-pressure
control valve/ regulator causing it to lose performance capabilities and eventually fail. Regulating these tanks to
1/2 PSI and using this pre-regulated propane with the correct low-pressure valve will insure safe, efficient
performance of the grill.
6
