CONTROL VALVE REGULATOR
•Uses standard 1-lb. disposable propane canisters (DOT-39 NRC 228/286).
•Prior to installing valve, become familiar with the valve function and graphics on valve knob.
Never force the knob.
Always turn or push gently.
•Turn control valve to “lock ”
and install gas canister being
careful not to cross the
threads. Check for leaks prior
to use, by brushing soapy
water solution around threads
and orifice hole checking for bubbles.
7
Install radiant plate & dome over burner on fire pan ridge.
8
Install grill grate by rotating grate so that both grill grate tabs slide under the holding clips
(8a)
,
locking grate and all internal components in correct position.
9
Insert the turbo venturi tube into the threaded pipe on the bottom of the grill body and firmly
tighten the threaded nut so nut doesn't turn while rotating the turbo venturi tube. Note: turbo
venturi tube should still rotate freely. Venturi tube should be stowed with valve in a clean dry
environment when not in use. (See "Stowing Tips" page 6) Before each use, prior to inserting
venturi tube, check that the threaded pipe is free of spider web obstructions.
CONNECTING FUEL SOURCE
High
Low
Medium
Indicator
Lock
Off
Unlock
OFF/
Lock
ON
•Position valve with gas bottle as shown
(A)
. Gently insert valve stem into
the turbo venturi tube. Rotate until valve stem key aligns with lock detent
allowing valve to fully insert. Rotate gas canister down
(B)
.
4
Align valve stem
key to valve lock
detent in venturi
tube and rotate.
8
7
8a
9
A
B
Valve Stem Key
Lock Detent
Valve will feel loose and will rotate easily. Even though the valve feels loose, it is designed that way
and will not leak. The valve was designed to be loose fitting in order to allow safe, easy installation
and removal of the propane canister and so it easily swings without resistance to fit all applications.
