Magma
ExpressBox 3400 | Chapter 3 Software Installation
24
Chapter 3 Software Installation
IMPORTANT
Magma requires no driver for Windows, Mac OS, Linux and other Operating Systems.
Software Check - Verify Installation (STEP 11)
Check Magma Device - Windows 7 and 8
Open ACPI (BIOS)
à
Open PCI Bus
à
Click the ‘+’ sign several times until your reach a PCI Express Root Port
or PCI Standard PCI-to-PCI Bridge with a PCI Standard PCI-to-PCI Bridge beneath it. If the verification is
successful, you can install 3rd Party cards as well as auxiliary peripherals, such as hard drives into the
chassis. If, however, the installation was unsuccessful, you may not see the PCI to PCI Bridge, or it will have
a small yellow symbol in front of it as shown below.
The first instance of PCI standard PCI-to-PCI Bridge is the Host Interface card device.
The second PCI standard PCI-to-PCI Bridge is the Expansion Interface card device.
Beneath the second PCI standard PCI-to-PCI Bridge are three instances of PCI standard PCI-to-PCI Bridges,
these are the three PCIe slots.
To check the Magma Device ID
Right Click on the PCI standard PCI-to-PCI Bridge, select Properties
Select the Details Tab
Under Property dropdown list select "Hardware lds
Under Value you should see " PCI\VEN_111D&DEV_80BF&SUBSYS_00000000
