background image

7

USING GRILL WITH ON-BOARD CNG (NATURAL GAS) SYSTEMS

Magma's grills are designed for use with small disposable propane canisters or with pre-regulated 
low-pressure propane and optional low-pressure valves. Running high-pressure propane fuel supply 
lines on a boat is in violation of American Boat & Yacht Council (ABYC) guidelines and is not 
considered a safe application. Additionally, impurities found in larger refillable propane tanks may 
clog the small orifices in the high-pressure control valve/ regulator causing it to lose performance 
capabilities and eventually fail. Regulating these tanks to 1/2 PSI and using this pre-regulated 
propane with the correct low-pressure valve will insure safe, efficient performance of the grill.

)-0/24!.4s$/./4#/..%#4!()'(02%3352%3500,9(/3%

FROM A NON-REGULATED TANK DIRECTLY TO GRILL.

s-AGMAONBOARD#.'NATURALGAS VALVESALLOW-AGMAGRILLSTOBEINSTALLEDTOANEXISTINGONBOARD

PREREGULATEDLOWPRESSURE#.'NATURALGAS SYSTEM

s5SEONLY-AGMA4YPE,OW0RESSURE#.'NATURALGAS CONTROLVALVES6ISITOUTWEBSITEAT

   

www.MagmaProducts.com

 to view valve application guide. See your local dealer for proper hose and fittings.

Problem

Electrode covered with grease or residue

Igniter/electrode too far from burner 

Electrode wire loose, disconnected, or corroded  

Wire is shorted causing spark from wire before 
electrode

No spark being generated 

 
 
 

No gas flow

 
Obstructed gas flow 

Excessive cooking temperature

Grease and/or residue build-up

Excessive fat in meats

Excessive oils in marinades

Obstructed gas flow

Flame too low 

Wind directly on burner

Obstructed gas flow

Grill not level

Grease or residue build-up

Excessive fat in meats

Excessive oil in marinades

Clean electrode

Adjust electrode until proper spark appears  
(see page 5)

Clean, adjust & reconnect wire between igniter 
& electrode, see Complete Disassembly (page 5)

Replace Igniter, Electrode & Wire 
See website for part number

Adjust electrode until proper spark appears.

5NSCREWIGNITERPUSHBUTTONREMOVEINSPECT

“AAA” battery, replace “AAA” alkaline battery if 
necessary, reinstall & re-assemble push button

Replace Igniter, Electrode & Wire 
See website for part number

Check fuel level, replace canister or  
refill cylinder

Clean burner and valve orifice.  
Remove debris/spider webs

Operate only on low when lid is closed

Reduce flame level

,EAVELIDOPEN
5SEWATERSPRAYTOCOOL

Clean components

4RIMFATFROMCUTSOFMEATBEFOREGRILLING
5SENONOILBASEDMARINADES

Clean burner and valve orifice. 

Remove debris/spider webs

Increase flame

Block wind when opening lid

Clean burner and valve orifice. 

Remove debris/spider webs

,EVEL'RILL

Clean components

4RIMFATFROMCUTSOFMEATBEFOREGRILLING
5SENONOILBASEDMARINADES

Hot Spots

Blow-out

Yellow sooty 
flame

Flare-up

Burner will    
not light even 
with match

Burner will    
not light with 
igniter

TROUBLE SHOOTING GUIDE

Possible Solution

Possible Cause

Summary of Contents for Catalina II A10-1218-2GS










Reviews: