Magma Cabo A10-703E Owner'S Manual Download Page 6

MAINTENANCE

Stainless steel contrary to popular belief can rust. Most commonly, deposits on surface of the product

will trap moisture.  It is this moisture that robs stainless steel of oxygen. Oxygen is the element that reacts

with stainless steel to form a protective layer of chrome oxide. Robbed of oxygen, this reaction does not

take place and “crevice corrosion” or “surface rusting” occurs. To minimize this effect, thoroughly clean your

grill with soap and water, rinse with fresh water, and dry. Avoid using stainless steel polishes on grill exterior

as most leave a residue that may discolor when grill is heated.

Additionally, stainless steel that is exposed to high heat will change color and texture over time. The

“amber” color of grill exterior and internal components is not a failure of the stainless steel and will not

affect  products operation. When this happens, we recommend using 

“Magma Magic” Grill Restorer

to

remove the “amber” color and return grill to its original luster. However, prolonged exposure to extreme

high heat will cause chromium and nickel to “burn out” of stainless steel. At this point stainless steel will

become more susceptible to corrosion and will start to deteriorate. We recommended replacement of

internal components as they become seriously deteriorated. 

We recommend thoroughly cleaning grill and internal components after each outing. Disassemble

interior components and remove all food residue. Use a “Scotch Brite” pad or similar product and “Easy-Off”

oven cleaner for cleaning grills interior components (except Heat Element), followed by thoroughly washing

with soap and water, rinse with fresh water & dry. AVOID CONTACT OF OVEN CLEANER  WITH SKIN,

POWER CORD, HEAT ELEMENT, AND BOAT SURFACE. CAUTION: DO NOT USE ANY TYPE OF ABRASIVE PAD

ON EXTERIOR MIRROR FINISH AS IT WILL SCRATCH SURFACE, USE ONLY A SOFT CLOTH. DO NOT IMMERSE

POWER CORD OR HEAT ELEMENT IN WATER OR OTHER LIQUID. We recommend covering grill between

uses. Grill covers are available at Magma retailers or directly from Magma. 

See our website, 

www.magmaproducts.com

Grill Grates -

Clean with brass wire brush while grill is warm. Use Oven & Grill cleaner for burnt-on

residue. Wash with soapy water and dry prior to storage.

Heat Element -

Clean with damp cloth. Do not immerse Heat Element in liquid. Do not clean with

abrasive cleaners or abrasive pads.

Repair/Replacement Parts - 

All replacement parts are readily available at your Magma Retailers or

directly from Magma. 

For a complete list of replacement parts visit our website 

www.MagmaProducts.com

.

6

Summary of Contents for Cabo A10-703E









Reviews: