INSTALLATION INSTRUCTIONS
3
See Magma website
for replacement part numbers
and valve applications.
www.MagmaProducts.com
MOUNT HARDWARE
Fasteners are supplied for Single Mount
mounting option. See Magma Website for
mount selection.
Carriage bolt,
washer & lock nut
Single mount through-bolt applications
4 Carriage bolts, washers & lock nuts.
Note: Place washers on carriage bolts as shown above.
Burner
Lid Lock
Lid
Handle
Grill Grates
Radiant Plate
Outer Shell
Match Light Hole
Mount Support Pad
with Folding Legs
Valve Chamber
Electronic
Ignition
Slide Out Grease Tray
Control Valve
Regulator Type1
Low-Output
Thermometer
CONTROL VALVE REGULATOR
•Uses standard 1-lb. disposable propane canisters (DOT-39 NRC).
•Prior to installing valve, become familiar with the valve function and graphics
on valve knob. Never force the knob. Always turn or push gently.
•Turn control valve to “lock” and install gas canister being careful not to cross
the threads. Check for leaks prior to use, by brushing soapy water solution
around threads and orifice hole checking for bubbles.
•Position valve with gas bottle as shown
(A)
. Gently insert valve stem into
valve chamber. Rotate until valve stem key aligns with lock detent allowing
valve to fully insert. Rotate gas canister down, so knob faces you
(B)
or
straight up
(C)
depending on application.
Indicator
Off
Medium
Lock
Unlock
High
Low
(A)
(B)
(C)
Valve will feel loose and will rotate easily. Even though the valve feels loose, it will not leak. The
valve was designed to be loose fitting in order to allow safe, easy installation and removal of
the propane canister and so it easily swings without resistance to fit all applications.
