Page 9
Troubleshooting
Problem
Possible Causes
Remedy
The pivoting handle is
difficult to transition
between folding and
unfolded positions
.
Pivoting handle
If the pivot handle is bent or damaged, it
should be replaced.
Check for burrs on the pivoting handle. File or
sand the burrs until they’re smoothed out, or
replace the pivoting handle.
Pivot sockets
If the pivot sockets are damaged or worn,
replace them.
The pivoting handle is
difficult to transition
between expanded and
collapsed positions.
Pivoting handle tubing
If any part of the handle tubing is bent, it
should be replaced.
Check for burrs on the pivoting handle. File or
sand the burrs until they’re smoothed out, or
replace the pivoting handle.
Handle locking buttons
If the handle locking buttons are damaged, they
should be replaced.
The pivoting handle does
not lock securely to the
frame.
Frame
Check the frame latch components. If they are
loose, tighten them.
Pivoting handle
Check the handle locking tabs. If they are bent
or damaged, replace them.
The deck is difficult
to transition between
different deck lengths.
Frame
Clean any debris within the frame slots.
If the sliding rods are damaged, replace them.
If the sliding rods are out of place, try to move
them into the correct position.
Check the frame latch components. If they are
loose, tighten them.
If any components are missing or damaged,
replace them.
The frame will not lock
securely into the different
deck lengths.
Frame
Clean any debris within the locking slots.
If the sliding rods are damaged, replace them.
If the sliding rods are out of place, try to move
them into the correct position.
Check the frame latch components. If they are
loose, tighten them.
If any components are missing or damaged,
replace them.