80676
2x
302881
80012
2x
302880
5
Finger tighten nuts/bolts only at this time.
Use a screwdriver to punch
a hole though the red stripe.
a. Loosely install the support arms (302880, 302881) at the bottom to the wheel brackets.
b. Loosely install the support clamp body (302901) and support clamp jaw (302902) with hardware (see
close-ups, below).
c. Place the lift bar (302903) between the support arms.
8
9
302903
80676
2x
Notches on the bottom of the support arms (302880,
302881) face toward each other (see above left).
302901
80675
2x
80256
2x
80013
2x
Finger tighten nuts/bolts only at this time.
9a.
9b-c.
302902
Close-up of support clamp body and support clamp
jaw around frame side rails.
81077
80783
80783
80782
Multi-Directional Wheel
IMPORTANT NOTE:
• Use the optimal number of extra
washers in the kit to minimize
side-to-side movement of the
wheel on the axle which may
vary slightly from diagram.
10
Multi-Directional Wheel Part Number
Double row
130502
Triple row
130503
