Page 6
Note: Be sure to allow adequate room on a flat, clear surface for converting the truck between 2- and
4-wheel positions.
Caution: While converting the Gemini between the 2- and 4-wheel positions, take
care to keep hands out of the way of moving parts.
From 2-wheel to 4-wheel:
1. Hold the Gemini securely with one hand on upper handle and the other hand on the top frame
cross member; press release latch (see Figure 1)
2. Keeping the upper handle as perpendicular to the ground as possible, slide the frame down the
upper handle until the handle plate rests on the spreader rod (see Figures 2 and 3).
3. You are now ready to use the Gemini in the 4-wheel position
Converting Gemini Between 2- and 4-wheel Positions
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Release Latch
From 4-wheel to 2-wheel:
1. Place one hand securely on the upper handle and the other hand on the top frame cross member
2. Keeping the upper handle as perpendicular to the ground as possible, begin to slide the frame up the
upper handle (see Figure 5). Continue lifting the frame to the top of the upper handle as you orient the
frame so that it becomes perpendicular to the ground (see Figures 5 and 6).
3. With the Gemini wheels and nose resting squarely on the ground, swing the bottom of the upper handle
toward the Gemini frame so that the spreader rod locks firmly in place with the latch/lock assembly (see
Figure 6)
4. You are now ready to use the Gemini in the 2-wheel position
