1-800-MAGLINE (624-5463)
Page 23 www.magliner.com
CooLift
®
Area
Description
Method of
Inspection
Normal Condition
Findings
Pass or Fail
T
iming
Notes
Brake System
Mounting screws on brake
discs are tight
V
isual inspection
•
Mounting screws on brake disc are
not backing out
•
Brake disc is mounted tightly to the
center wheel
W
eekly
Brake System
Holding brake pawl in good
condition and operating
properly
V
isual inspection
Set brake
•
No visible damage
•
Brake locks in place
Daily
Suspension
Wheels and tires are in good
condition
V
isual inspection
Wheels and tires are free of damage
W
eekly
Suspension
Components are straight and
undamaged
•
Front wheel mounting yoke
•
Main axle
•
Rear swivel caster frames
Manual inspection
•
Components are not damaged and
operate freely
•
Main axle plating is not cracked or
damaged
W
eekly
Operator Interface
External mounting screws
are tight
•
Base plate mounting to
frame
•
Enclosure mounting or base
plate
•
Handle mounting screws
•
Switch mounting hardware
is tight
Manual inspection
Components are tight to mounting
surfaces
W
eekly
Operator Interface
•
Handle, enclosure and door
are free of damage and in
good condition
•
Door latches are fully
functional
V
isual inspection
•
Straight sections
•
Smooth curves
•
Flat surfaces
•
Minor scratches and dings are
expected
W
eekly
Operator Interface
Handle grips
V
isual inspection
Grips are not worn or damaged
W
eekly
Operator Interface
Containment strap
Manual / V
isual
inspection
•
Belt should be free of tears and abra
sions
•
Plating on buckle should not be cracked
or damaged
•
Mounting screws should be tight
•
Mounting tab should not be bent or
damaged
•
Belt should retract into housing such that
only the buckle protrudes
•
Housing should not be cracked or
damaged
•
Strap tongue should rotate freely
W
eekly
Area
Description
Method of
Inspection
Normal Condition
Findings
Pass or
Fail
T
iming
Notes
Electrical
Buttons and switches
V
isual inspection
•
No cracks or damage.
•
No loose mounting hardware.
Daily
Electrical
Lift system
•
Limit switches
•
Motor
Manual inspection
•
No loose components
•
Wiring harness are not damaged
•
Check connectivity
Every 2
weeks
Electrical
Propulsion system
•
Motor
•
Clutch
Manual inspection
•
No loose components
•
Wiring harness are not damaged
•
Check connectivity
Monthly
Brake System
Fluid level
V
isual inspection
Fluid level up to notch in master
cylinder reservoir
Monthly
Brake System
Hose without damage, abra
-
sion, wear
V
isual inspection
No visible damage or wear
Monthly
Brake System
Brake discs have minimal
rub and warp
Spin wheel
Wheel should continue to rotate
several times before stopping
Monthly
Suspension
Wheels and casters spin
freely
Manual inspection
Wheel should continue to rotate
several times before stopping
Monthly
Suspension
Mounting hardware is tight
•
Front wheel yoke
•
Rear caster frame
•
Main axle mounts to frame
and axle clamp
•
Nuts for main wheels
Manual inspection
All hardware is tight
Monthly
Lift System
Lift system mount screws to
frame and deck are tight
Manual inspection
Lift system mount screws are tight
to frame; deck mounting screws are
tight
Monthly
Lift System
Hardware is properly
installed and undamaged
V
isual inspection
All hardware is in place and in good
condition
Monthly
Lift System
Acme screws
V
isual inspection
•
Components move freely up and
down the screws
•
Screws are straight
•
Screws are clear of debris
Monthly
