Programming device ready for Mobile App
Magcoding Monster can be controlled by mobile App. With mobile application, the robot can be controlled more detailed way and various ways as below
1.
Download the mobile Android App from the website and install in your mobile phone or other smart device. Simply turn on the Bluetooth on
your smart device first and turn the switch to CODE mode of the robot.
2.
Start Magkinder App first. And when you see the Bluetooth sign on the right above, please click on Bluetooth sign.
Then you will see the device list and choose ‘Magcoding00’. If it is connected to app and robot, the Bluetooth sign changes
the color and the robot make sounds of “Magkinder”
1.Programming device ready for Mobile App
2. Magkinder Controller : 3 types of controllers
1) Joystic 2) Button 3) Gyro
Music coding: 2 Octave is possible by App.
3 Magkinder Card
CodingDirection, sounds, light, numbers, etc
4.Magkinder Voice Coding
5.Magkinder Demo Motion
By App, the coding modes can be switched easily.
note!
By the App, a calibration for the distance for robot’s step size, volume,
robot’s tuning can be adjusted easily.
Magnetic & Plastic Block Compatibility
All Magcoding coding robots are basically compatible to building blocks
of both magnetic and plastic at the same time. With building blocks available,
this building blocks give better educational advantages for
STEAM education to kids as well as teachers.
Magcoding Monster’s sensors, buttons, switches, etc.
C
M
Y
CM
MY
CY
CMY
K