34
EN
To make a cup of good hot Espresso coffee, we recommend you
preheating the appliance before making coffee, including the
funnel, filter and cup, so that the coffee flavor can not be influenced
by the cold parts.
Note
Preheating
Make espresso coffee
position which is the « » position.
4. Connect to power source, press the ON/OFF switch. The power
indicator (red) will be illuminated.
5. Turn the knob to the « »position, the pump will pump water, when
there is water flowing out and close the pump by turning the knob
again to the « » position, make sure the steam button is on the
higher position which is the « » position and waiting for a moment,
the appliance begins to be preheated until the coffee indicator is
illuminated, it shows the preheating is finish. Turn the knob to the
« » position again, and water will flow out.
6. After about one minute, turn the knob to the « » position to stop
brewing, you can pour the water in each container out then clean
them thoroughly, now you can start brewing.
1. Remove the detachable tank and open the tank cover to fill it with
desired water, the water level should not exceed the “MAX” mark in
the tank. Then place the tank into the appliance properly.
2. Set the steel mesh into a metal funnel, make sure the tube on the
funnel aligns with the groove in the appliance, then insert the funnel
into the appliance as indicating of “INSERT” mark, and you can fix
them into the coffee maker firmly through turn it anticlockwise until it
is fully locked.
3. Place a cup on a removable drip plate.
4. Then connecting the appliance to the power supply source.
Make sure the knob is on the « » position. Press the ON/OFF
switch, the power indicator (red) will be illuminated, make sure
the steam button is on the higher position which is the « »
position. Turn the knob to the « » position, when there is water
flowing out, close the pump immediately by turning the knob again
to the « » position. The purpose of the step is that pump the water of
the tank into the housing.
5. When the coffee indicator is illuminated, you should turn the knob to
the « »position again, there will be hot water flowing out. When the
coffee indicator is extinguished, close the pump by turning the knob
again to the « » position. The preheating is finished.
1. Remove the funnel by turning it in clockwise. Add ground coffee to
steel mesh with coffee spoon, a spoon ground coffee power can
