Magio MG-962, Manual

Page: 41 / 44

ENGLISH
position, when there is water flowing out and close the pump by
turning the knob to the“ ” position, and waiting for a moment, the
coffee maker begins to be heated.
5. When the coffee indicator is illuminated, it shows the heating is
finish. Turning the knob to the
“ ” position and make two cups
coffee. Then close the pump and wait for 5s.
6. Press down the steam button to the lower position which is the
“ ” position, waiting for until the steam indicator is illuminated.
Make steam for 2 minutes, then turn the knob to the
“ ”position
to stop making steam. Press the power switch to stop the unit
immediately, make the descalers deposit in the unit at least 15
minutes.
7. Restart the unit and repeat the steps of 4-6 at least 3 times.
8. Then pressing and release the steam button to the higher
position which is the “ ”position, when
the coffee indicator is illuminated, Turning the knob to the
“ ”
position to brew until no descaler is left.
9. Then brewing coffee (no coffee powder) with tap water in the
MAX level, repeat the steps of 4-6 for 3 times (it is not necessary
to wait for 15 minutes in step of 6), then brewing until no water is
left in the tank.
10. Repeat the step of 9 at least 3 times to make sure the piping
is cleanly.
11. When all water is in the container (cup), set the operation
mode selector to " ". Turn off the coffee machine.
STORAGE
- Before removing the coffee maker for long-term storage, clean
it.
- Store the device in a cool dry place, out of the reach of children
and people with disabilities.
TROUBLE SHOOTING, THEIR CAUSES AND REMEDY
METHODS