Magio MG-446, Instruction Manual

Page: 31 / 37

31
EN
Before first use
Always lift the cookware directly from the plate, do not
move it, otherwise it may scratch the surface of the
induction plate.
Note
Attention! Do not use aluminum, copper and ceramic
utensils, as well as utensils with a bottom diameter of
less than 12 cm and more than 20 cm.
Unsuitable utensils for use with induction plates
Operation
For proper ventilation of the appliance, the distance from
all its surfaces to the walls must be at least 10 cm.
Note
scratches and abrasions on the plate.
• Do not use utensils with a spherical (non-flat) bottom or on
foots.
• Do not use non-magnetic utensils.
• Do not use ceramic, copper, aluminum and heat-resistant
glassware, as well as non-magnetic stainless steel
cookware.
After transportation or storing the device at a low temperature,
keep it at room temperature for three ho urs at least.
-
Unpack the device completely and remove any stickers
and packing materials that are obstructing the device.
-
Check the integrity of the device. If it is damaged, do not
use it.
-
Wash carefully the induction plate with wet cloth and wipe
it dry.
-
Place the plate on a flat, hard and dry horizontal non-
metallic surface away from heat and open flames. Make
sure that there are no decorative coverings, electrical
appliances and other objects nearby that may be affected
by high temperatures.
1. Connect the device to the mains. Place the appropriate
kitchen utensils in the middle of the cooking surface of the