Magio MG-349, Instruction Manual

Page: 21 / 24

21
EN
Operation
8. Allow the appliance to cool for 5 minutes and pour water from the
bulb (6). Repeat the procedure 2-3 times. The coffee maker is ready
for use.
1. The process of cooking coffee is to pass the hot water under steam
pressure through ground coffee. It gives the drink a unique flavor and
a pronounced taste.
2. Open the filter holder (5).
3. Using a measuring spoon, pour the required amount of ground coffee
into the filter (4), level it, but do not loosen it.
4. Close the filter holder (5).
5. Open the water tank cover (1) and fill it to the desired level with cold
water but not above the MAX mark.
6. Close the tank cover (1). Place the flask (6) on the platform (7).
7. Insert the plug of the power cord (2) into the socket. Turn on the coffee
maker by turning the switch (3) to position (I), with the network light on,
and the coffee maker will start to work.
8. When all the water passes through the filter, turn off the coffee maker
by setting the switch (3) to the «0» position.
9. To keep the coffee hot, hold the flask (6) on the platform (7) without
turning off the coffee maker.
There will be less finished coffee, since ground coffee absorbs
part of the water.
»
When there is no need to heat the bulb (6), do not forget to turn off
the coffee maker by moving the switch (3) to position «0».
»
During cooking, the water under steam pressure passes through
ground coffee, so it is prohibited to open the filter holder (5) and remove
the filter (4).
The appliance is intended only for preparing a drink from ground
coffee!
Note:
1. Unplug the appliance before cleaning.
2. Wipe the outer surface of the appliance with a damp cloth.
3. Clean the separate parts in warm water with some washing-up liquid,
dry thoroughly.
Cleaning and maintenance
Do not immerse the appliance, the power cord, the power plug into
water or other liquids.