MAGINON MPP 10000-SF, Instruction Manual

Page: 19 / 28

Commissioning
17
The charging status is identical when charging via USB cable
or solar panels.
You can also check the charging status of the power bank
without charging it or any other device. Briefly press the on /
off button
11
. The battery status indicator LEDs
6
display
the current charge level of the power bank for approx. 35
seconds.
Battery status indicator
LED
Charge condition
4 LED lights are on 100 %
3 LED lights are on 75 %
2 LED lights are on 50 %
1 LED light is on 25 % or less
The above values are approximate and may vary slightly in
reality.
Charging time of the power bank
It takes about 3 hours to fully charge the power bank from
0-100% through a USB charger (5V, 2A).
Charging devices with the power bank
• Use the USB charging cable supplied with your phone and
plug it into one of the two USB ports
7
/
9
. Make sure
that unused USB cables are disconnected from the power
bank.
• The included Micro USB charging cable
2
can also be
used if your devices have a Micro USB port.
• Charging starts automatically when the device to be
charged is connected to the power bank. The battery
status LEDs
6
light blue depending on the charging