Activate
“Use SMTP“
, if an email is to be sent out in the event of an
alarm� Please note that the alarm must be activated under alarm
settings�
The data required as regards the used email account will be provided
by the Email provider� For your private email account you can also find
this data in email programs such as Outlook or Thunderbird�
The so-called SMTP Server (Simple Mail Transfer Protocol) is a post
output server of an email provider� Emails are sent to this server for
forwarding�
1�
Server:
Enter address of SMTP server of Email account�
2�
Port:
Enter port of SMTP server� The standard value is 25�
3�
Requires authentication:
State whether the SMTP server requires
authentication� If yes, mark this option and state the user name
and password of the email account�
4�
Encoding:
State the encoding used by the SMTP server�
5�
Sender:
State email address via which an alarm message is to be
sent�
6�
Recipient 1-4:
Provide up to 4 email addresses via which an alarm
message is to be sent� If you want to a message to be sent to the
email address, sending out the alarm messages, you have to enter
the address also as recipient�
7�
Send IP address:
This option allows you to determine whether an
email will be sent with the current IP address of the surveillance
camera to the listed email addresses as soon as the IP address of
the surveillance camera changes�
Fields
“Server“
,
“Port“
,
“Sender“
and
“Recipient 1“
are mandatory
fields� Click on
”Test“
to test the email settings� A test email is then
sent to the listed email addresses�
Click on
“Save“
, to accept the changed settings� The changes are
saved
without having to restart
the WiFi Video Camera�
Use
44
Summary of Contents for IPC-30 FHD
