4�
Key:
Data in wireless networks are in most cases transmitted
encoded to prevent third-party access� State what type of
encoding is used in your WLAN network�
When
“Uncoded“
is selected, data are
not encoded
prior to
transmission� When using“WEP“, “WPA“ or “WPA2“ encoding, additional
encoding information must be provided� Enter the same settings as
shown for the router or access point�
− Enter wireless network settings without changing�
This is the only way to ensure the correct
connection of the WiFi Video Camera�
− Also, general settings of the router or access points
should not be changed where this is not required�
Otherwise this could result in problems with other
WLAN devices in the network�
Use the
“Search“
function to start an automatic search of existing
wireless networks� Select the desired WLAN network from the list by
marking it under
“Selection”
and click on
“Use“
� Where encoding data
is required for the selected network, these must still be entered�
Click on
“Save“
, to accept the changed settings� Next, restart the
WiFi Video Camera to accept the changes� The restart takes about 2
minutes�
Use
41
Summary of Contents for IPC-30 FHD
