7
4.2. Inserting the batteries
Open the battery cover below the strap by
slightly pressing the side clamp inwards and
removing the cover.
Insert three batteries from type AAA (1.5V)
or batteries of the same specifi cation
correspondingly with the opposite fi gure.
While doing so, place the black strips under
the batteries in order to make it easier to
remove them later. Put the battery compartment cover on again and close it tightly.
4.3. Inserting and removing the memory card
In order to be able to make recordings with the video camera, you must fi rst insert a memory
card into the device. Insert the memory card into the memory card shaft on the bottom of the
video camera corresponding with the
image and press it far enough into
the device until you hear it audibly
lock in place.
In order to remove the memory card,
press shortly on the card; this will
then be pushed a little bit out of the
device and can be removed.
For recordings with 1280 x720 pixels,
SDHC memory cards from class 6 or
higher should be used.