background image

MKG SERIES GAS GRIDDLE                                                                                               INSTALLATION & OPERATION

                         

10

5.

 

CLEANING & MAINTENANCE SECTION:

5.1.

 

DAILY CLEANING:

A.

 

Clean the griddle surface often to prevent sticking and poor quality of food product. Scrape the griddle plate regularly
with a scraper intended for your type of griddle surfaces to remove all surface grease and food debris.

NOTICE:

Do not use Grill Bricks, Grill Screens, or any other type of abrasive material on your

MagiKitch'n Chrome Griddle Surface. 

USING ABRASIVE MATERIALS  WILL VOID YOUR WARRANTY.

B.

 

Clean and wipe out grease chutes.

C.

 

Wipe down the exterior, the sides and front of the griddle are stainless steel, any stainless steel cleaner can be used to
clean these surfaces.

D.

 

Remove and empty grease box(es) of any and all debris, also wipe down the inside of the grease box compartment for
food particles that may have come free from the grease box.

NOTICE:

The grease box is designed to contain grease run off from the griddle surface. The grease box should NEVER be

allowed to overfill, and should be emptied daily and the grease disposed of properly.

5.2.

 

GRIDDLE SURFACE CLEANING, END OF SHIFT:

5.2.1.

 

Plain Steel Cooking Surface:

A.

 

Scrape griddle surface completely with a scraper to remove grease and loose food debris.

B.

 

Use a grill brick or grill screen to clean any heavy build up of carbon from the griddle surface. Never use
steel wool pads, small fibers may be left behind on the cooking surface.

C.

 

When griddle surface is cool, Polish surface with Magi Kleans'r, or similar type non-abrasive, non-caustic
cleaners that are approved for stainless steel.

D.

 

It may be necessary to season the grill again after this cleaning.

5.2.2.

 

Chrome Plated Cooking Surface:

A.

 

Scrape griddle surface completely with supplied scraper to remove grease and loose food debris.

NOTICE:

Do not use Grill Bricks, Grill Screens, or any other type of abrasive material on your

MagiKitch'n Chrome Griddle Surface. 

USING ABRASIVE MATERIALS  WILL VOID YOUR WARRANTY.

B.

 

When griddle surface is cool, Scrub the Chrome surface with the supplied palmetto cleaning brush and cool
water.

C.

 

Shine the Chrome griddle cooking surface with Magi Kleans'r, water and a soft cloth.

D.

 

Rinse with clean water and wipe away any residue with a dry cloth.

5.3.

 

MONTHLY MAINTENANCE:

NOTICE:

Regular maintenance of your MagiKitch'n griddle is 

Recommended

 to keep the appliance operating properly

.

5.3.1.

 

Monthly Checks:

A.

 

Use a grill surface thermometer to make sure thermostats are operating properly.

B.

 

Through the pilot holes in the front panel, visually check that the pilot(s) flame(s) are strong and light the
main burners properly.

C.

 

Through the pilot holes in the front panel, visually check the appearance of the main burners, all burners
should have a nice blue flame.

D.

 

Make sure that all gas connections have not been tampered with or damaged, check for leaks with a soapy
water solution. 

Never use an open flame to check for leaks

.

E.

 

Check to see that the flue exhaust area has no food debris, or blocked in any way. Never allow the flue to
become excessively dirty. The flue being free of obstruction is imperative to proper burner operation.

Summary of Contents for pmn

















Reviews: