Grace Timer & PEM7 timer
YELLOW-#3 terminal
BLACK-#1 terminal
BLUE-#4 terminal
Dixmor DigitTimer 3
YELLOW-red wire on timer
BLACK-green wire on timer
BLUE-brown wire on timer
Ginsan GS7 timer
YELLOW-24VAC #3 terminal
BLACK-24VAC #1 terminal
BLUE-#4 terminal
3)
DISPLAY PANEL AND BUTTONS
The iCoin utilizes a display panel and pushbuttons for setup and self-diagnostics.
The display panel has several indicator lights that show power status, which coins
the iCoin is currently accepting, and setup information regarding tokens. The
pushbuttons allow one to change the coins that are to be accepted and to set the
tokens (if any) that the iCoin is to accept.
4)
DISPLAY DURING POWER UP
During the initial power up sequence, the iCoin displays the current settings for
several options. For the first second after power up, the 5 indicator lights 1, 2, 4, 8,
and 16 for #pulses for Selected Token show the current Token Sensitivity setting,
the Pulse Speed setting, and the Preprogrammed Coins Number of Pulses Setting.
Immediately following this, indicator lights 1 and 2 for #pulses for Selected Token
will display for approximately 1 second to show normal power up. Finally, the
normal operating display will show the current coin and token settings.
For more information on the Token Sensitivity setting, the Pulse Speed setting, and
the Preprogrammed Coins Number of Pulses setting, see the appropriate section
that follows.
5)
CANADIAN QUARTER, LOONIE AND TOONIE SELECTION
The iCoin is preprogrammed to accept one or all of Canadian quarter, $1 (loonie)
and $2 (toonie) coins. Once the iCoin is powered up, the display panel shows which
coins the iCoin is activated to accept. For example, if the indicator lights for Cdn-
