Page 32
3.9. Installation Procedure
Before commencing installation, ensure that the intended installation will comply
with details in
General Information
on Page
1
.
The Burley Magiglo Duo is designed to be inset into a 16” fireplace opening.
Any surround that is to be installed with the Burley Magiglo Duo must be rated at
150
o
C.
Carefully unpack the contents of the carton and check them against the checklist given on the
previous page.
Make sure that the fireplace opening is suitable for the installation of the fire and prepare the
fireplace to suit the dimensional requirements given in sections
3.3
,
3.4
and
3.6
.
3.9.1. Installation using Freedom Surround
The Freedom Surround is designed to provide an alternative installation method giving it a
contemporary hole-in-the-wall appearance whilst reducing heat transfer to the fabric of the
building.
The Freedom Surround greatly reduces the risk of cracking caused by excessive heat being
transferred from the appliance to the wall.
If there is insufficient depth to accommodate the chosen appliance, a 30mm spacer is
available – see the
Installation Using a Spacer Frame
section within this document.
When installed in a timber framed building, the Freedom Surround greatly reduces the amount
of insulation required around the appliance, however, the rear of the appliance and any flue
will still require the same level of protection.
