TROUBLESHOOTING
Side adjustment:
Using a Phillips screwdriver, rotate screw (1)
clockwise to move the door left and
counter-clockwise to move the door right.
Moves the door up to 2 mm.
Depth adjustment:
Using a Phillips screwdriver, rotate screw (2)
clockwise to move the door forward and counter-
clockwise to move the door backwards.
Moves the door up to 2 mm.
Height adjustment:
Using a Phillips screwdriver, rotate screw
(3) clockwise to move the door upward and
counter-clockwise to move the door
downward. Moves the door up to 2 mm.
Figure 3 - Adjusting Hinges
Possible Cause:
Mounting screws are not level.
Wall is not level.
Corrective Action:
Remove the cabinet from the wall and
check the mounting screws. Adjust as
needed.
Adjust the door hinges. Figure 3.
Problem:
Cabinet is higher on one side than the
other.
1) Cabinet doors rub against another
surface.
2) There is a large uneven gap between
the cabinet doors and cabinet.
