MAGICFX
®
STADIUMBLASTER
—
User and Installation Manual
23
3.4
CONNECT 24 V CONTROL
24 V
24 V
1.
Connect two cables to the 24 V input.
2.
Connect the other ends of the cables to your controller.
NOTICE
No additional power source is needed. The controller provides
power to the MAGICFX
®
STADIUMBLASTER to open and close the
output valve.
NOTICE
The FX LED indicator and the display and buttons are inactive
when control is applied. The controller only powers the output
valve.
3.5
BLAST WITH 24 V CONTROL
1.
Make sure that the safety zone is free from persons and hazardous objects.
2.
When it’s time to blast, continuously, enable the output on your 24 V controller
and make sure to produce a continuous pulse.
NOTICE
The best effect results are achieved when you open the lid just
before you start blasting. Make sure that no foreign objects will
enter the hopper and close the lid again after the effect.
3.
Enjoy the view!
4.
When the hopper is out of confetti, disable the output on your 24 V controller.
