8 MAGICFX
®
STADIUMSHOT III
—
User and Installation Manual
1.4
DMX CONTROL
The MAGICFX
®
STADIUMSHOT III is controlled with 1 enable adress and 1 operational
address.
DMX Address
Address range
Enable address
1 – 512
Start address (Trigger)
1 – 512
DMX addresses
The enable address cannot be the same as the operational address. Operating of
these addresses results in the following:
DMX Address
DMX Value (decimal)
Result
Enable address
0
99
Device disabled
100
154
Device enabled
155
255
Device disabled
Start address
(Trigger)
0
199
No output
200
255
Fire
Operation of the DMX addresses
When you link multiple machines with DMX, we advise you to use the same enable
address for all machines.
CAUTION
Always plug in a DMX Terminator into the DMX output of the final
unit in the control sequence. Using a DMX Terminator improves
signal reliability.
1.5
DISPLAY PANEL
INFORMATION
ERROR HISTORY
CONFIGURATION
DMX/RDM SETTINGS
Display panel
The display panel is located on the backside of the MAGICFX
®
STADIUMSHOT III.
Check the following menu structure for all options in the menu. Use the buttons for
navigation and selection. The left-hand LED blinks red when DMX is active. The right-
hand LED continuously lights red when an error is present.
Summary of Contents for MFX0408
Page 40: ...WWW MAGICFX EU ...
