MAGICFX
®
FX-SWITCHPACK
—
User and Installation Manual
9
NOTICE
Make sure the outputs are deactivated before activating the safety address. The
safety address cannot be activated when one or more outputs are activated.
When you link multiple machines with DMX, we advise you to use the same Safety address for all
machines.
CAUTION
Always plug in a DMX Terminator into the DMX output of the final unit in the
control sequence. Using a DMX Terminator improves signal reliability.
1.7 SEQUENCE MODE
In sequence mode, the ouputs are controlled individually.
In sequence mode the MAGICFX
®
FX-SWITCHPACK works with 1 safety address and 4 sequential
addresses. The Safety address cannot be the same as one of the sequential addresses.
Operating the addresses in sequence mode results in the following:
DMX Address
DMX Value (Decimal)
Function
Safety address
0
99
Device disa
b
led
100
155
Device enabled
156
255
Device disabled
Start address
0
199
Output 1 disabled
200
255
Output 1 enabled
Start a 1
0
199
Output 2 disabled
200
255
Output 2 enabled
Start a 2
0
199
Output 3 disabled
200
255
Output 3 enabled
Start a 3
0
199
Output 4 disabled
200
255
Output 4 enabled
Operation of OPreation of the
Operation of the DMX addresses
NOTICE
Make sure the outputs are deactivated before activating the safety address. The
safety address cannot be activated when one or more outputs are activated.
When you link multiple machines with DMX, we advise you to use the same Safety address for all
machines.
CAUTION
Always plug in a DMX Terminator into the DMX output of the final unit in the
control sequence. Using a DMX Terminator improves signal reliability.
