14 MAGICFX
®
FX-SWITCHPACK
—
User and Installation Manual
6
Connect the female connector of a
5-pole DMX cable to the DMX input on
the FX-SWITCHPACK.
Connect the other end to your DMX
controller.
7
Make sure the resettable output fuses are in position ‘1’.
8
Check the LED output indicators to see if
the outputs are activated.
If not: Connect the male connector of the
PowerCon TRUE1 link cable(s) to your FX-
machine(s).
Connect the other end(s) to the switched
output(s) on the FX-SWITCHPACK.
9
Use the display and buttons to set the machine into SEQUENCE or MERGED mode and to
assign DMX addresses, see chapter 1.
CAUTION
Always plug in a DMX Terminator into the DMX output. Using a DMX
Terminator improves signal reliability.
DMX IN
DMX OUT
5-pole female
DMX
POWER
PowerCon TRUE1 male
