www.magicard.com
RIO 2e, TANGO 2e & TANGO +L Printers USER MANUAL
Page 12 of 33
1.
Open the top cover by pushing down on it and operating the release catch on the top of the printer.
2.
Remove the used dye-film by gently pulling both spools upwards until disengaged from the clips. Take care not to bend and break the
clips.
3.
Open a new roll of dye-film.
4.
Place the loaded spool into the rear clips and press it into place. The orientation is correct when
the barcode on the end of the spool is on the left. Rotate the dye film roll to allow the core to
lock into position.
5.
Place the empty take up spool into the front clips, and adjust the film tension so that the film is
lying flat and straight between the two spools.
6.
Gently close the top cover until it clicks into the closed position. The printer will
automatically recognize the type of film that has been loaded and move it to the correct
printing position.
4. Loading the Dye-Film Ribbon
5. Choosing the right Lamination Film
(Tango +L Only)
Your
Printer
Lamination
Film Type
Cards Per
Film
Part Number
Clear Patch 0.6mil Laminate Roll
255
M9007-231R
Clear Patch 1.0mil Laminate Roll
255
M9007-230R
Clear Patch 0.6mil Laminate Roll With Chip Cut-Out
255
TBA
Holographic Overlay Laminate Roll With Globes
Design
500
TBA
Ma
g
ic
a
rd
T
a
n
g
o
+
L
Custom Holographic Laminate Roll
Both Patch & Overlay Types Can Be Supplied
255/500
Ask For
Details
