Quick Start Guide
Ultra Electronics Card Systems
Page 2
MAGICARD Sicura Laminator
Setting up your
Sicura Laminator
takes just two easy steps:
1.
Unpack and install the laminator
A
Preparing a Location for the Laminator
B
Removing the Laminator from the Box
C
Check the Package Contents
D
Install the Lamination Film
E
Connect the Laminator to a Power Supply
F
Set the Optimum operating temperature and test the
Laminator
Operation
G
Interfacing to a Rio/Tango printer
Important Note for Setting Up your Rio/Tango Printer Driver to work
with
the
Sicura
Laminator
H
Interfacing to a Turbo series printer
2.
Stand-alone Mode
I
Operation of the Hopper
J
Adjusting the Hopper
K
Error
Indicators
3.
Verify correct operation
L
Important
Cleaning
Procedures
M
In Case of Difficulty
Note
: The Ultra WEB site at
http://www.ultramagicard.com
contains comprehensive technical support
information including the latest downloadable software, WINDOWS Drivers, Technical Bulletins etc
Conventions
Throughout this guide, the following conventions are used to identify important
information.
WARNING
-
Warning messages indicate where personal injury could result from not
following the correct procedures
.
CAUTION
-
Caution messages indicate where damage to equipment could result
from not following the correct procedures.
NOTE
-
Notes convey important information that is identified within the text
.
