35
MAGIC-PRO MP-6VIP-D+
Note: This option will not be displayed unless the EPP/
ECP is selected.
Choose DMA3 (default) or DMA1. Most sound cards use
DMA1. Check with your sound card configuration to make
sure that there is no conflict with this function.
ECP Mode Use DMA
Note: The above 2 options will not be displayed unless the
EPP/ECP is selected.
Choose EPP1.7 (default) or EPP1.9. EPP1.9 supports hard-
ware handshake. This setting is dependent upon your EPP
device.
EPP Mode Select
Choose the printer I/O address: 378H/IRQ7 (default), 3BCH/
IRQ7, 278H/IRQ5 or Disabled.
Onboard Paralle Port
Choose Normal (default), ECP/EPP, SPP mode. The mode
depends on the external device connected to this port.
Onboard Parallel Mode
Choose Standard (default), HPSIR or ASKIR.
UART 2 Mode
The choice: Enabled (default), Disabled.
Onboard Legacy Audio
The choice: Half (default), Full
IR Function Duplex
Choose No, Yes (default) / No, No / Yes, No / Yes, Yes.
TX, RX inverting
enabled
Note: The above 2 options wont work unless UART2
Mode HPSIR/ASKIR is selected.
