MAGIC-PRO MP-6VIP-D+
11
CD_IN1/CD_IN2: CD-ROM Audio Connector
RT2: Thermal Sensor Connector
GAME/MIDI Port:
Connect joystick or MIDI to this connector.
MIC :Microphone Jack
Connect to microphone device.
LINE IN: Audio In Jack
Connect audio line in.
LINE OUT/SPEAKER OUT: Audio Out Jack
Connect audio line out or speaker out.
JWOL1: Wake On LAN (WOL) Connector
This connector is designed to boot up system via LAN. Connect the wake
on signal form the LAN card to this connector.
Left Channel
PIN 1
Left Channel
CD_IN2
PIN #
CD_IN1
GND
PIN 2
GND
GND
Right Channel
PIN 3
GND
PIN 4
Right Channel
a: Connect to RT2.
b: Connect this thermal sensor to
particular device which
generates lots of heat such as
Hard Disk, VGA chip, etc.
When connected, user could
observe the temperature
change from the BIOS
program.
