- When the heating blanket is spread out on the bed, do not let children jump on it. If they do, check thoro-
ughly that every part of the blanket is in order.
- Never disassemble or repair the heating blanket yourself. Tampering with the equipment will void the
warranty.
- If the electric heating blanket is no longer to be used, it must be turned off and disconnected from the
power source by pulling the plug of the power cable from the power outlet. Never pull the heating blanket
out of the socket by the power cable while it is switched on and if your hands are wet or damp. Make sure
the power cord is not damaged.
- In case of any damage to the power cable, immediately switch off the heating blanket and disconnect it
from the power source. The power cord cannot be replaced. The heating blanket must be disposed of in
accordance with the applicable regulations.
- Store the heating blanket folded (or twisted) not too tightly, without bending the heating element in a dry
place. Do not place heavy objects on the blanket or twist it. After storage, carefully inspect the blanket before
further use. Do not use the blanket with a damaged power cord.
- If dirt appears on the blanket, follow the instructions for cleaning the heating blanket
in the "Cleaning and Maintenance" section.
OPERATION AND ASSEMBLY
INSTRUCTIONS FOR USE
- Cover yourself with the heating blanket. The edge where there is no power cord with the controller belongs
to the legs. Make sure that the heating blanket is not wrinkled or kinked.
- Connect the power cord with the controller to the heating blanket and then connect the power cord plug
to an electrical outlet (make sure the power cord is not damaged or tangled in any way).
- When the heating blanket is in use, the controller must not be covered. Make sure it is not placed under
the heating blanket, cushion or other objects, or near other heat sources, it could overheat and be damaged.
- Turn on the heating blanket using ON/OFF.
TEMPERATURE SETTING
- Use the temperature setting buttons to set the desired heating temperature level (1 = 25 °C, 2 = 29 °C, 3 =
33 °C, 4 = 36 °C, 5 = 39 °C, 6 = 43 °C, 7 = 47 °C, 8 = 51 °C, 9 = 55 °C)
- For maximum comfort, we recommend setting the heating temperature level to the highest level 9 and
letting the heating blanket warm up for approx. 10 minutes before use.
SETTING THE TIMER
- Use the timer setting buttons to set the heating time in whole hours between 1 and 9 hours.
- After the set time has elapsed, the heating blanket will switch off.
- If the timer is not set, the heating blanket will automatically switch off after 9 hours of operation.
OVERHEATING PROTECTION
- The heating blanket is equipped with a safety system that protects the blanket from overheating and
damage.
- In the event of a malfunction, the system switches the blanket off (the display goes out) and it cannot be
used again. In this case, you must contact an authorised service centre.
(*) Authorised service: the manufacturer's or importer's service department or another person who is
qualified, authorised and competent to carry out this type of repair. The heating blanket must be handed
over to such a repairer in the event of a repair.
CLEANING AND MAINTENANCE
- If the heating blanket becomes soiled, switch off the appliance and pull the power cord plug out of the
electrical outlet.
Summary of Contents for QD16-SXKW-EG
Page 1: ......