MAGICFX® STAGE SHOT II, STADIUM SHOT II & X-TREME SHOT
—
User and Installation Manual
19
5
Place a pressure cap on top of the
output pipe.
6
Secure the pressure cap to the output
pipe with special pressure cap tape.
3.5 FILL WITH PRESSURIZED AIR
1
Connect the hose from an air compressor
to the air coupling.
Only use a compressor with a maximum
output of 8 bar. The end of the hose must
be fitted with a quick-connect coupling.
2
Switch on the air compressor and fill the tank to a maximum pressure of 8 bar.
3
In case you do not want the compressor to refill the tank after the shot: Switch off the
compressor and disconnect the hose.
Summary of Contents for STAGE SHOT II
Page 25: ......
Page 26: ...WWW MAGICFX EU...