User documentation MAGICFX® CO2 Dominator
Page 19
13. TROUBLESHOOTING
-
The CO2 Dominator is leaking
Check if the coupling of the gas hose is connected properly to the coupling of the CO2 Dominator. If it
is not entirely secured then press it firmly. This is only possible when there is no pressure on the hose.
If the problem persists, then consult the technical service of MAGIC FX.
-
Only a small smoke plume is visible when the CO2 gas exits the CO2 Dominator.
Visibility can vary due to air humidity. The output will be more visible when there is high absolute air
humidity.
-
There is no white smoke plume visible when the CO2 gas exits the CO2 Jet.
You may not have the right carbon dioxide cylinders. Connect bottles with liquid carbon dioxide and a
dip pipe to the CO2 Dominator.
In some cases the dip pipe may be broken. In that case replace the carbon dioxide bottle with another
and inform your gas supplier about the cylinder with the defective dip pipe.
-
The CO2 Dominator is still malfunctioning after troubleshooting
Always contact your dealer or the technical service of MAGIC FX first in case of uncertainties,
questions about the CO2 Dominator works or other issues with regard to the CO2 Dominator.
14. TECHNICAL SPECIFICATIONS
Measurements
and weight
Length:
350mm (13.8
”)
Width:
350mm (13.8
”)
Height:
150mm (5.9
”)
Weight:
18 Kg (39.7lbs.)
Power
Input:
AC 230V~50-60Hz
Usage:
125W
Fuse:
5A 250V 5x20mm
DMX
Input:
3 pin Neutrik XLR Male Socket
Output:
3 pin Neutrik XLR Female Socket
CO
2
Input:
Liquid CO
2
Output:
CO
2
Gas
Usage:
0,5 Kg/s (1.1 lbs/s) per output
Quick Connector:
RU 1 (W21,8x1/14")
– 3/8” BSP
Design and product specifications can be changed without prior notification.
