User documentation MAGICFX® CO2 Dominator
Page 13
5.
Place the CO2 cylinders (liquid carbon
dioxide with dip pipe) on an even and
solid surface. Place the cylinders in such
a position so that the opening of the
valve does not point in the direction of
people or objects. Preferably place the
CO2 cylinders outdoors or in a space
provided with good ventilation and a CO2
detection system. CO2 cylinders are
pressure containers. Therefore secure
them with special gas bottle brackets or
a chain to prevent them from toppling
over.
4.
Now connect the CO2 high pressure
hoses of 2 metres length to the CO2
cylinders.
Turn the couplings firmly by hand.
Turning it by hand will suffice! You should
only use a wrench if the coupling continues
to leak.
3.
Connect a 3-pin DMX cable to the CO2
Dominator.
You can connect several CO2
Dominators to each other by using 3-pin
DMX cables.
Connect the other end of the DMX cable
(male plug) to a professional DMX
controller.
Always make sure that the controller is
placed in such a way that the operator has a
clear view of all the connected CO2
Dominators.
Consult the manual of your DMX controller
for instructions and the safe use of it.
