1
Step 1: Position the washer against the wall
where it be installed. Place the wall bracket
on top of the washer and slide back until the
flat rear of the bracket is flush to the wall.
If the wall is ceramic or smooth tile, peel the
backing off the rear of the bracket and firmly
stick to wall, then skip to Step 6.
If the wall is brick, drywall, etc., proceed to
Step 2.
Step 2: Mark the position of the holes in the
bracket on the wall with a pencil.
2
Step 3-4-5: Carefully drill holes at the
marked positions for wall anchors, and
insert the anchors. Securely attach the wall
bracket to the wall using screws in the wall
anchors.
3
5
4
E
E
E
F
F
F
B
