background image

9

7. Remove the two screws from the top cover support. Install top cover support on the 

opposite side of refrigerator.

8. Remove the middle hinge. Remove plug buttons from the opposite side of refrigerator. 

Re-install plug buttons in the original hinge mounting holes. Door Reversal (cont.)

9. Remove the fresh food door by lifting off the bottom hinge.

10. Remove both adjustable legs.

11. Remove the bottom hinge and re-install on the opposite side of the refrigerator.

12. Re-install the adjustable legs. Insure that the smaller leg is on the same side as the 

bottom hinge.

13. Place the fresh food door on the bottom hinge.

14. Place the bottom peg of the middle hinge in the fresh food door. Re-install middle 

hinge. Make sure the fresh food door is aligned with the refrigerator cabinet before 

tightening screws.

15. Place the freezer door on the top peg of the middle hinge. Place the top hinge peg 

into the freezer door. Re-install top hinge. Make sure the freezer door is aligned with the 

refrigerator cabinet before tightening screws.

16. Re-install the top cover with four screws.

17. Replace the screw caps.

Summary of Contents for MCSF-5585BSS

































Reviews: