12
OVEN INSTALLATION
When the cabinet has been prepared according to the dimensions given and the gas line is in place�
1�
Remove the range oven from its packaging�
2�
Hold the baffle of the top glass cover and pull it upwards to release it from the oven� (Figure 5) Push a little
and lift up to remove the top glass cover from the oven� (Figure 6)
Figure 6
Figure 8
Figure 7
Figure 5
3�
Slide the range oven into the cabinet opening� Verify the oven is level from side to side and front to rear�
(Figure 7)
4�
Connect a propane supply line to the range oven in the upper left rear corner of the cabinet� Connect a
positive 12V power supply wire and a 12V ground wire to the appliance in the upper right rear corner of the
cabinet� (Figure 8)
5�
Use four tapping screws on both left and right
to secure the range oven onto the cabinet�
(Figure 9)
IMPORTANT
: Make sure the gas supply pipe
cannot contact any moving parts after installation�
Leave adequate space for the gas supply pipe in case
it is bent or damaged after installation� Use propane
gas only for this appliance�
Figure 9
Summary of Contents for MCFR17STS
Page 14: ...14...
