a
b
c
d
g
h
i
j
e
f
LEARNING ABOUT YOUR IRON
a
Spray Nozzle
b
Water Fill Hole
c
Adjustable Steam Control
d
Spray Button
e
Temperature Control Dial
f
Heel Rest
g
Power Light
h
See-through Water Reservoir
i
Skirt
j
Iron Soleplate
E4
HOW TO USE YOUR IRON
IMPORTANT: CLEAN BEFORE USING THE FIRST TIME!
See the CARE AND CLEANING section for more information.
During first use of the iron, the appliance may appear to “smoke”.
This will stop and does not indicate a defect or hazard. Steam
vents should be cleared before first use to remove any residue
remaining from the manufacturing process and to ensure that no
stain is transferred to fabric the first time the iron is used.
TO CLEAR STEAM VENTS
1. Make sure iron is unplugged from power outlet.
2. Turn ADJUSTABLE STEAM CONTROL to “NO STEAM” “ ”
position.
3. Fill iron with water to the “MAX” fill line. Overfilling the iron
may cause the iron to spill water during use.
NOTE:
Do not overfill the WATER TANK and never fill with
anything but water.
4. Plug cord into a 120 volt AC electrical outlet, and set the
TEMPERATURE CONTROL DIAL to its highest setting “LINEN”.
5. Let the iron preheat for 2 minutes while sitting on the HEEL
REST.
6. Turn ADJUSTABLE STEAM CONTROL clockwise to the heavy
steam setting .
7. Press the iron over an old cloth, and let it steam for a few
minutes. The iron may spit or sputter during the first uses with
tap water. As the Steam Chamber becomes conditioned, this
occurrence will stop.
E5
