Magewell Ultra Encode, User Manual, Reference And Faq, Page: 22 / 63

Manage Streaming Sessions
The encoder will start working automatically once a streaming session is added.
That is, the first streaming task successfully added will start automatically; or, if
the encode is streaming a TS, SRT or RTMP task, another streaming session,
which use the same protocol as is the one streaming, will automatically start
once added.
Of course, you can manually added, modify, or delete any of streaming
sessions listed in
Streaming Server tab.
Notes
Streaming Server
The encoder natively supports streaming to YouTube, Facebook, Twitch, as well as self-defined servers.
Click Edit to modify the parameters of the stream.
■
Click Delete to remove the source from the list.
■
Turn on/off the switch to start/stop streaming.
■
Click Add and select a RTMP, RTMPS, RTSP, SRT Caller/Listener, NDI|HX2,
HLS (push), or a TS over UDP/RTP server to stream to.
■
Supported streaming protocols - RTMP, RTMPS, RTSP, SRT Caller, SRT
Listener, NDI|HX2, HLS(push), TS over UDP, TS over RTP.
■
Allow simultaneous sessions over the same streaming protocol.
■
Up to 6 sessions of TS over RTP and TS over UDP simultaneously.
■
Up to 6 sessions of SRT Caller and SRT Listener simultaneously,
containing one SRT Listener session at most.
■
Up to 6 sessions of RTMP and RTMPS simultaneously. It means that as
■
22