Magerit Polyseq, User Manual, Page: 19 / 22

19
MIDI adds way more possibilities to the module. Here you will find all the MIDI parameters and
commands.
Appendix
MIDI and notes
In the CV menu you will have selected the MIDI channel (1 to 8). Besides from playing the keyboard
notes and their response (PITCH, GATE or TRIG), there is the CC1 mod wheel command and the PITCH
BEND feature.
If you play a note while a sequence is running, it will be paused temporarily. Once you stoped playing,
pattern playback will automatically be resumed.
Advanced features
Modify the speed at which
the sequences are played. The
ratios defined in each pattern (In
PATTERN menu) will be keeped in
mind as well.
These speeds only affect to the
MIDI clock.
Allows you to transpose the
sequence or the notes played up to
twelve semitones. C 5 (represented
with a dot) indicates that there is
no transposition. When the module
is turned on, there wont be any
transposition by default
This group of notes enable or
disable each of the four
sequences or all at the same time
(A 4, indicated with the letter T).
(See screen indicators on the next
page).
Reset each output individually or
all at the same time (E 4, indicated
by the letter T).
SEQUENCE
PLAYBACK SPEED
(MIDI)
TRANSPOSE
ENABLE / DISABLE
SEQUENCE (play
sequences or not)
RESET SEQUENCE
Do4