ADJUSTING THE MAGENTA TT10 TURNTABLE
Unscrew for leveling adjustment
The TT10 To check if you have done it right just push the spindle
down with your index finger, the platter should go down and come
up always staying level. That means that the platter should not
rock or wobble. If it does you have to make new adjustments.
Adjusting is done by unscrewing the tips of the cones, the base of
the motor and the third feet is fix, so all adjustments should be
referred to the motor base.
The motor is suspended to avoid vibration transmission to the
main frame.
VERTICAL TRACKING ANGLE
INITIAL ADJUSTMENT
Check whether the arm and the head shell are parallel to the
record. Most manufacturers of cartridges take care to mount the
tip and cantilever in such a way that a Vertical Tracking Angle of
round and about 20 degrees is achieved when the arm is parallel
