Connector Pinouts
MultiView™ II DVI-Rx-1K
Installation and User Guide
17
Serial port (IOIO) Connector Pinout
If the receiver is an -SAP
version, then the serial interface will be provided on the “IOIO” connector. This is a
DB9-M type serial connector, configured to look like a standard 9-
pin “DTE” serial port.
Therefore, in most applications a straight through serial cable or adapter-plug (DB9-Female-to-Male) is used to
connect an external serial device (for example, a
display’s serial control port) to the receiver.
Table 6: Serial Port Pins
Pin#
Signal Name
3 wire (SAP)
1
DCD
-
2
RX
RX
3
TX
TX
4
DTR
-
5
Ground
Ground
6
DSR
-
7
RTS
-
8
CTS
-
9
RI
-
Figure 8: DB9-M Serial Port Connector
